Home Campaigns
📣

Campaigns

Write, review and send your outreach
By Benjamin
• 13 articles

Create a campaign

A campaign writes to a group of people, in steps, from your own inbox and LinkedIn account. What you need: - at least one connected inbox or LinkedIn account - people to write to: an agent, a list or a CSV file Step 1: Start a new campaign Click New campaign, at the top of any page or on the Campaigns page. Campaigns, with New campaign marked Step 2: Pick the people (Audience) Choose who to write to: From an agent, A contact list, Pick in Contacts, or Import a CSV. The Audience step, with the four sources marked → Learn more: Set up your first agent Step 3: Write the messages Choose Email, LinkedIn or Email + LinkedIn. Looply starts you with a ready sequence: - Email: 3 emails. The 2nd goes 3 days after the 1st, the 3rd 4 days later. - LinkedIn: a connection request, a message when they accept, and a follow-up 4 days later. For each message, pick Write my own or AI personalised. AI personalised writes a different message for each person, from their signal. You can have up to 5 steps, 1 to 30 days apart. The Messages step, with Write my own and AI personalised marked At the bottom of this step, pick a Tone (Friendly, Direct or Formal) and keep Review every email in Copilot before it sends ticked for your first campaign. For LinkedIn it says "message". The Messages step, with the review checkbox marked Step 4: Choose senders and hours Pick the Email inboxes and LinkedIn accounts to send from, then the Days and Hours. The Sending step, with the accounts and hours marked → Learn more: Warm-up and daily limits Step 5: Review and launch Looply shows a summary: the people, the messages and the inboxes. Check it, then click Launch campaign. The Review step, with Launch campaign marked → Learn more: Review mode, Autopilot and Copilot If the button says Create campaign instead, Looply saves the campaign as a draft. That always happens with Pick in Contacts or Import a CSV, and whenever people or a sender are missing. Open the campaign to finish it and launch it. Good to know - Connection requests go without a note by default. A note can be up to 200 characters (300 with LinkedIn Premium), and it is never written by AI. - When someone replies, Looply stops the sequence for that person. - A campaign sends only inside its days and hours, and within each account's daily limits. What happens next - In Review mode, each message waits in Copilot for your approval. - The campaign page shows Sequence, Leads, Activity and Settings. Activity lists every send, person by person. Nothing sending? See My campaign isn't sending.

Last updated on Nov 09, 2026

Review mode, Autopilot and Copilot

Copilot is where you approve campaign messages before they are sent. Each campaign runs in one of two modes. | Mode | What happens | | --- | --- | | Review mode (on by default when you create a campaign) | Copilot holds every invite, LinkedIn message, voice message and email until you approve it. | | Autopilot | Messages go out on schedule without waiting for your approval. | Start with Review mode. Switch to Autopilot once you trust the messages. Good to know: a campaign Looply creates for you during set-up starts in Review mode. Approve messages 1. Open Copilot and stay on Needs review. 2. Read the message. Click Edit to change it, or Reject to drop it. 3. Click Approve and next. Looply sends it at the next slot inside the campaign's hours. Switch a campaign between Review mode and Autopilot Use the Review mode / Autopilot switch in Copilot, or the campaign's Settings → Require approval before outreach. The Copilot tabs | Tab | What it shows | | --- | --- | | Needs review | Messages waiting for your approval. | | Upcoming | LinkedIn messages due in the next 48 hours. | | Scheduled | Approved messages waiting for their send time. | | Sent | What went out. | | Failed | What could not be sent, so you can act on it. | | Campaign paused | Messages held because their campaign is paused. Shown only when there are some. | Copilot, with the Upcoming tab marked You can filter by campaign, channel and sender. Drafts of replies to people who answered you are in the Inbox, not in Copilot.

Last updated on Nov 10, 2026

My campaign isn't sending

First open Campaigns. A running campaign with a problem shows under Needs attention, with the reason under its name. A draft shows what is missing under Drafts. Campaigns, with the reason under a campaign's name circled Then find what you see below. | What you see | Why | What to do | | --- | --- | --- | | "Needs a sender before launch" | No inbox or LinkedIn account is picked. | Click Finish setup and choose one. | | The campaign says Draft or Paused | It is not running. | Open it and launch or resume it. | | Messages sit in Copilot's Needs review | The campaign is in Review mode. | Approve them in Copilot. | | "Campaign invites and messages from this account wait until it has a sending schedule." | The LinkedIn account has no days and hours. | Set them: see Connect your LinkedIn account, step 4. | | "Outside this campaign’s sending hours." | It is outside the campaign's days or hours. | Wait, or click Edit schedule to widen them. | | "…’s LinkedIn is warming up: week 1 of 3." | A new account sends a few a day for 3 weeks. | Nothing. See Warm-up and daily limits. | | "Daily invite limit reached on …’s LinkedIn." or "This campaign’s daily invite limit is reached." | Today's invites are done. | Wait for tomorrow, or raise the limit. | | "…’s LinkedIn is in safety mode until [date]." | LinkedIn asked the account to slow down. | Let it end on its own. | | The LinkedIn account shows Signed out or Disconnected | Looply can't use it. | See LinkedIn statuses and warnings. | | The inbox shows Reconnect or Disconnected | Looply can't use the inbox. | Click Reconnect in Settings → Email senders. For an IMAP / SMTP inbox it opens the form with the address filled in: enter the new password. | | LinkedIn messages don't go out | A message waits until the person accepts your connection request. | Nothing. It sends after they accept. | | Email steps skip some people | They have no email address. | Turn on finding missing emails in the campaign's email settings (1 credit per email found). | | An inbox connected with Google doesn't send | Recipients' consent is not confirmed. | Confirm Recipients opted in in the campaign's email settings. | | Nobody to write to | The list or agent behind the campaign has no people yet. | Add people, or wait for the agent's next run. | A campaign page, with a notice marked To see exactly what happened to each person, open the campaign's Activity tab and filter on Failed. Still stuck? Write to us from the chat with the campaign's name.

Last updated on Nov 16, 2026

When Looply sends

Looply sends only inside a campaign's days and hours. LinkedIn sends must also fall inside the account's sending schedule. Within those windows, Looply spaces each send out and stays under the daily limits. The sending windows | Window | Where to set it | Default | | --- | --- | --- | | The LinkedIn account's Sending schedule | Settings → LinkedIn accounts → ⋯ → Sending schedule and limits | None. Without it, the account sends nothing. | | The campaign's days, hours and time zone | The Sending step, then the campaign's Settings → Schedule | The LinkedIn account's schedule, else Monday to Friday, 09:00 to 17:00 | The campaign's time zone comes from the LinkedIn account, your Preferences or your browser, until you pick one. To change a running campaign's schedule, pause it first. A campaign's Settings, with the Schedule card marked → Learn more: Connect your LinkedIn account How sends are spaced out LinkedIn. By default, each account sends at most 3 invites or messages every 15 minutes. Each send also gets a random delay of up to 3 minutes. Change the pace with Outbound sends per 15 minutes (1 to 8) in the campaign's Settings. Email. Between two emails from the same inbox, Looply waits the Minimum time: 9 minutes by default. It adds a random wait of up to the Random additional time: 5 minutes by default. Each can be 0 to 240 minutes. Daily limits | Limit | Where | Default | | --- | --- | --- | | LinkedIn invites and messages per account | Sending schedule and limits | 20 invites and 30 messages a day, lower during warm-up | | LinkedIn per campaign | Settings → LinkedIn sending limits | 20 invites and 40 messages a day per account, never above the account's own | | Emails per inbox | Settings → Email senders → ⋯ → Change daily limit | 30 a day, lower during warm-up | | Emails per campaign | Settings → Sending pattern → Daily email sends | 100 a day, never above each inbox's own limit | | New email leads per day | Settings → Sending pattern → Max new leads | No limit | All campaigns on one LinkedIn account share its limits. LinkedIn sending limits, with Outbound sends per 15 minutes marked → Learn more: Warm-up and daily limits · Email warm-up and daily limits See what goes out next - Copilot → Upcoming lists the LinkedIn messages due in the next 48 hours, with their text. - Copilot → Scheduled lists approved messages waiting for their time. - In Review mode, nothing goes out before you approve it. It then sends at the next free slot. → Learn more: Review mode, Autopilot and Copilot Good to know - A LinkedIn message waits until the person accepts your connection request. - Connection request expires after (7 days by default) is how long Looply waits for an acceptance. 0 turns it off. - Dispatch priority decides what uses the next free slot: Balanced, Follow-ups first or New leads first. If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | "Campaign invites and messages from this account wait until it has a sending schedule." | The account has no days and hours. | Set its Sending schedule. | | "Outside this campaign’s sending hours." | It is outside the campaign's days or hours. | Wait, or widen them. | | Fewer sends than you set | Shared limits, warm-up or spacing. | See My campaign isn't sending. |

Last updated on Nov 16, 2026

When someone replies

An email reply always stops the sequence for that person. A LinkedIn reply does too while Stop LinkedIn messages on reply is on, which is the default. Looply then labels the reply and does what the campaign's When they reply rules say. The rules Open the campaign, then Settings → When they reply. | Label | Default | Other choice | What the default does | | --- | --- | --- | --- | | Interested | Stop the sequence, move to Inbox | Stop the sequence | The lead stays stopped. An email conversation in Others moves to Primary. | | Out of office | Try again in 7 days | Stop the sequence | The sequence restarts the day after the return date the auto-reply gives, or 7 days after the reply. | | Wrong person | Ask for the right contact | Stop the sequence | Looply drafts a short reply asking who to talk to. It sends only when you do. | | Not interested | Stop and mark the lead | Stop and never email them again | The lead is marked Not interested. | | Unsubscribed | Stop and never email them again | None | Always on. No campaign of yours emails the address again. | A campaign's Settings, with When they reply marked Other labels, such as a question, "not now" or an auto-reply, apply no rule. The sequence stays stopped and the reply waits in the Inbox. Email and LinkedIn - Email replies can trigger every rule. - LinkedIn replies trigger only Interested and Not interested. - Stop LinkedIn messages on reply is on by default, in the campaign's Settings → LinkedIn. It stops LinkedIn outreach to a lead after a response. Change a label Looply labels each email reply and shows how sure it is, for example "Interested · 92% sure". If it is wrong, open the conversation in the Inbox and pick another label. The campaign then follows the rule of the new label. An email reply in the Inbox, with its label marked → Learn more: Inbox Good to know - A reply older than 14 days only stops and marks the lead. It never restarts an old sequence or drafts a reply. - When an email bounces for good, the lead stops and the brand never emails that address again. The campaign's Activity shows Email bounced. - If an address unsubscribed or bounced before, later emails to it are skipped. In Activity, the Email line shows Skipped. → Learn more: Unsubscribes, bounces and who Looply won't email - To send extra steps when someone replies a certain way, add a reply branch to the campaign. → Learn more: Follow up on replies with reply branches If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | An out-of-office lead started again | The rule is Try again in 7 days. | Choose Stop the sequence for Out of office. | | A draft titled Ask for the right contact in the Inbox | The Wrong person rule wrote it. | Edit and send it, or discard it. | | A reply has the wrong label | The AI misread it. | Change the label in the Inbox. The new label's rule applies. |

Last updated on Nov 16, 2026

Follow up on replies with reply branches

A reply branch is a short extra sequence inside a campaign. It starts for a person when they reply a certain way, or finish your steps without replying. Branches sit under the campaign's steps, at When they reply. Branch steps follow the campaign's rules: - Review mode: with Review before send on, each step waits for your approval. On Autopilot, branch steps send without it. - Sending hours and a paused campaign: steps wait, then go on. - Blocklist: Looply never emails an address on your Blocklist. An unsubscribe or a bounce ends that person's branch. What you need: a launched campaign to start a branch (you can write one before). For email steps, an earlier email with the person in this campaign: the branch replies in that thread. Step 1: Add a branch On the campaign's Sequence tab, under the steps, click Add a branch. Pick the reply that starts it, like Interested, Out of office or They finish without replying. Looply adds a Draft branch with one email step and opens its rules on the right. When they reply, with the Add a branch menu open Step 2: Choose what starts it Give it a Name. Then pick what starts it. Any one is enough: - Starts when they reply: the labels a reply gets in the Inbox, from Looply or from you, and Looks positive (Looply's read before anyone labels it). On email, Question and Not now count as Maybe interested. Wrong person and Out of office come only from email replies. - Or when their reply mentions: type a word, then press Enter. - Or when they finish the campaign without replying. Only new replies count: replies from before you start the branch, replies older than 14 days and unsubscribes start nothing. Click Save. A branch's rules, with Starts when they reply marked Step 3: Write the steps Click a step under the branch. Set Who writes it, the Channel (when LinkedIn is on), Wait before this step and the Message. Change the sample text. - An email is Sent as a reply in their thread. Turn that off to write a Subject. - In an email, + Variable adds First name, Company or Sender first name, and Random text gives each person one of several options. - A LinkedIn message has its own buttons: + First name, + Company, + Job title and + Why now. Random text and the sender's name stay in emails. - With AI writes it, Looply reads the person's company website and fills the ✦ parts. Those messages always wait for your review. Click Save. Add a step to this branch adds an email 2 days later. A branch email, with Who writes it and Message marked Step 4: Set the limit and start it 1. In the rules, Sending limit is the Campaign's daily limit, counted for this branch alone. You can pick Custom or No limit. Leave Ignore each LinkedIn account's daily limits off. 2. Click ⋯ on the branch's row, then Start branch. Its tag turns from Draft to Live. What happens next - Each row shows what starts it, its steps, and its numbers: in it now, sent, failed, waiting for your review. - A newer reply ends a person's branch. A reply that matches two branches starts both. - The campaign's When they reply rules (Settings tab) still run. The default Out of office rule restarts the main steps after the return date. Set it to Stop the sequence if the branch should be the only follow-up. - ⋯ on a row also has Pause branch, Resume branch, Duplicate branch and Archive branch. An archived branch sends nothing more: the people in it get no further steps. If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | Start branch is grey | The campaign is a draft, or nothing starts the branch yet. | Launch the campaign, or finish its rules. | | failed in the row | An email found no earlier email with the person, or uses a variable Looply doesn't know. | Check the steps. | | Review 1 draft (or more) at When they reply | Review mode, or AI writes it. | Click it, then Approve and send or Reject. Rejecting ends that person's branch. | | Steps don't go out | The campaign is paused, outside its hours, or at the branch's daily limit. | Resume it, or check Schedule in its Settings tab. | Related articles: When someone replies · Unsubscribes, bounces and who Looply won't email · Change a campaign that's already running

Last updated on Nov 16, 2026

How Looply writes your messages

Looply writes each AI message from the lead's signals and your business page. You choose, step by step, whether Looply writes it or you do. Your business page comes first Settings → Your business says: "Looply writes every email and LinkedIn message from this page." It holds What you sell, Who buys it, Problems you solve, What to offer and your Voice. - Click a block to edit it. - Add real customer results under Proof points. The AI cites only these and never makes results up. - Refresh from website reads your site again and rewrites the blocks. Your proof points stay. Settings, Your business, with Refresh from website marked Each step: AI personalised or your own In a campaign, each email or LinkedIn message is one of two kinds: | Choice | What goes out | | --- | --- | | AI personalised | Looply writes a different message for each lead, from their signals and your business page. | | Write my own | Your text, sent as written. Variables (First name, Company, Job title, Why now) fill in from each lead. | Connection requests are never written by AI. A note is optional and holds up to 200 characters (300 with LinkedIn Premium). The Messages step, with AI personalised and Write my own marked → Learn more: Create a campaign What shapes an AI message | Where | What you set | | --- | --- | | The Messages step | What the AI should stress for this campaign, and a Tone: Friendly, Direct or Formal. | | Campaign Settings → AI context | Prospecting language, Tone, Offer / resource to send and Additional AI context notes. | | Settings → AI writing | The templates behind each AI step. | Prospecting language is the Workspace default unless you pick one of 13 languages for the campaign. AI writing templates Settings → AI writing holds "Templates that control how Looply writes for each lead." Each one is for Email or LinkedIn, and for a First touch, a Follow-up or a Last bump. - Looply's own templates are marked System. Click Duplicate to make your own copy. - Set default makes a template the Default for its channel and purpose. - In a template, How it writes sets the style, length and writing guidance. More options holds the rest, such as Never say: words and phrases Looply must not use. - Write a sample writes a sample for one lead of one campaign. Once you have your own templates, a campaign's AI step offers Template: Looply’s default or one of yours. Settings, AI writing, with a template's Set default marked Before anything goes out - In Review mode, you read and approve each message in Copilot. → Learn more: Review mode, Autopilot and Copilot - Copilot → Upcoming shows the next LinkedIn messages, written ahead of time. - If an AI LinkedIn message fails Looply's checks, the step's own text goes out instead, marked Step text.

Last updated on Nov 16, 2026

Customize how Looply writes: AI writing templates

A template tells Looply how to build each AI personalised message: the fixed text, the parts Looply writes, the tone and the length. Each brand starts with Looply's own templates, marked System. You can't change those, but you can copy them. What you need: - to be the Owner or an Admin, if you work in a team (Members can only read templates) - a campaign with leads, to preview your template Step 1: Open AI writing Go to Settings → AI writing. At the top, pick the purpose: First touch, Follow-up or Last bump. In a new campaign, the first email or message is a First touch. The last of three or more is a Last bump. The others are Follow-ups. Step 2: Copy a template On the template to start from, click ⋯ → Duplicate. The copy appears with "(Copy)" after its name. Click it to open it. (An open System template also has Duplicate to edit.) You can also click New template. Check the channel and purpose next to its title: you can't change them later. AI writing, with Duplicate marked in a System template's menu Step 3: Write the message Give it a Name. Email templates also have a Subject. In Message, the words you type stay exactly as written. Above it: - + Variable adds First name, Company or Sender first name. - Written by Looply adds a part Looply writes for each person: Opener from their signal, Your offer, Proof you approved (email only) or Closing question. In the subject: Subject from their signal. - Random text gives each person one of several options. Start with a greeting and First name, like "Hi" or random text "Hi / Hello / Hey". An email needs Opener from their signal, Your offer and Closing question. A LinkedIn message needs Closing question, and Opener from their signal or Your offer. Looply checks this when you save. The template page, with Variable, Written by Looply and Random text marked Step 4: Set the tone and length On the right, How it writes sets Tone, Length (Short, Medium or Long), Ends with and Language. More options holds the rest, like Exact length (up to 200 words and 1,400 characters), Never say and What to say for each signal. Then click Save. Step 5: Preview it Under Preview, pick a person after Preview as, and a campaign after from. Click Write a sample. A good sample shows Passes the quality check. Nothing is sent, and the sample doesn't use credits. The sample uses the saved template: save your changes first. The Preview card, with Write a sample marked Step 6: Use it in a campaign - ⋯ → Set default makes it the Default for its channel and purpose. New campaign steps left on Looply’s default use it. - Or, when you create a campaign, pick Template → Your template: … on an AI personalised step. - In a draft or paused campaign, click an email step and choose AI writes it. Under Template, click Change, pick yours, then click Save. Your changes apply to the messages Looply writes after you save. In Review mode (Review before send), you still approve each one in Copilot. → Learn more: How Looply writes your messages If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | A line under a field when you save, like "Words: at most 200." | The template breaks a rule. | Fix what it says, then save again. | | Write a sample stays grey: "No campaign has a step that uses this kind of template yet." | No campaign of this brand has a step for this channel. | Add such a step to a campaign, with people in it. | | Held for review. in the preview | The sample didn't pass the quality check. Messages like it wait until Looply writes them again or you edit them in Copilot. | Adjust the template, save, then write another sample. | Related articles: Create a campaign · Review mode, Autopilot and Copilot

Last updated on Nov 16, 2026

Read your campaign's Activity tab

The Activity tab lists what your campaign did for each person, newest first. Open a campaign, then click Activity. A campaign's Activity tab, with the status filters and the first lines marked Each line A line shows the person, what happened, when, and the account that handled it. The list keeps the 50 latest events. The badge on the photo gives the kind of event: | Badge | Meaning | | --- | --- | | Blue | Looply sent a connection request, a LinkedIn message or an email. | | Green | The person accepted your invitation or replied. | | Grey | A wait, a skipped step or information. | | Red | A send failed or expired, or an email bounced. | A few events need explaining: - Message received: they wrote to you before the campaign messaged them. - Waiting for your review: the message waits in Copilot. - Reply rule applied: your When they reply rule acted on their reply. - Campaign paused: Looply paused the campaign, for example because a LinkedIn account must reconnect. A tag such as Scheduled, Pending, Failed, Expired or Skipped means the step didn't simply go through. A failed, expired or held step has a sentence under the line that explains it, for example "The invitation wasn’t accepted in time." A scheduled send shows its next try. A skipped email shows no reason here. When its address is on your Blocklist, the person's line in Leads says so. "Spaced out by Looply’s pacing: 3" counts LinkedIn actions that ran a few minutes late on purpose. That's normal. Filter the list - Click All, Pending, Success or Failed. - With two senders or more, pick one in the menu beside them. - Click Upcoming to see how many next actions are planned. On Campaigns, "3 sends failed in the last 24 h · see Activity" opens Activity on Failed. The column beside the list The Activity tab's side column, with Campaign funnel marked - Campaign funnel: Invited, Accepted, Messaged, Replied, with the share that moved on from the step before. Email-only campaigns show Messaged and Replied. - Today sends: what this campaign sent today, against what it may send from its LinkedIn accounts. - By sender: each account's day across all its campaigns, against its own limit. Tags show Warm-up · week 1 of 3 or Protected. A red count went over a limit: it was "Sent before today’s limit changed". → Learn more: Warm-up and daily limits Where each person stands The Leads tab gives each person a status: | Status | Meaning | | --- | --- | | Pending | Not started yet. | | In progress | Part-way through the steps. | | Replied | Answered a campaign message. Their sequence stopped. | | Inbound | Wrote to you before the campaign messaged them. | | Completed | Reached the end of the sequence. | | Failed | A step failed for good. A red line says why. | | Paused | Looply stopped this person, for example because the campaign has no inbox to send from. | | Expired | The invitation wasn't accepted in time. | | Unsubscribed | They asked to stop, in a reply or with the unsubscribe link. Looply won't email them again. | | Blocked | Their address or its domain is on your Blocklist. A line says "This address is on your blocklist, so Looply skipped it." | A booked meeting shows Meeting booked: see Mark a meeting booked. The Leads tab, with the status counts marked Related articles: My campaign isn't sending · Unsubscribes, bounces and who Looply won't email · Your Blocklist · Change a campaign that's already running

Last updated on Nov 16, 2026

Change a campaign that's already running

You can change some things while a campaign runs. For its steps, senders, limits and sending hours, pause it first. What you need: a campaign that is Running or Paused. While it runs, you can change: - its name, description and review mode, in Settings → General; - its When they reply rules and AI context; - Find missing emails, Prioritize new leads, Stop LinkedIn messages on reply and LinkedIn safety; - its people, with Leads → Add leads. People on your Blocklist are added as Blocked or Unsubscribed and never start. Pause it first to change: - its steps and waits; - its inboxes and LinkedIn accounts; - its sending pattern, daily limits and Schedule. Step 1: Pause the campaign Open the campaign and click Pause at the top. Nothing is sent while it's paused, and leads keep their place. In Copilot, its scheduled messages show as Campaign paused. A running campaign, with Pause marked Step 2: Make your changes Steps. Click a step, edit its text, then click Save. To change a wait, click its pill, such as "2 days later". Add a step adds one after the last step. On a running campaign, an open step says it "is running. Pause it to edit this step.", with a Pause campaign button. Add a step asks you to pause. Pause the campaign to change its steps, with Pause marked If some leads are part-way through the sequence, you can't add, remove or reorder steps. You can still edit each step's text. Settings. On a running campaign, the Settings tab starts with a note. Rows that need a pause are greyed out. A running campaign's Settings, with the note at the top marked Step 3: Resume Click Resume. Leads continue where they stopped, within the campaign's hours and limits. Leads that show Unsubscribed or Blocked stay stopped. What happens next - After a switch to Autopilot, messages waiting in Needs review go out without your approval. - A changed reply rule acts on replies labelled after the change. - Looply can pause a campaign itself when its LinkedIn account must reconnect. Activity then shows Campaign paused. Reconnect the account, then click Resume. → Learn more: Review mode, Autopilot and Copilot · When Looply sends If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | "Leads are part-way through these steps" | Some leads already started the sequence. | Edit the steps' text. For a new sequence, click ⋯ → Duplicate: you get a draft with the same steps, without its leads. | | Greyed-out rows in Settings | The campaign is running. | Click Pause first. | | Resume shows "Something went wrong. Please retry." | A sender isn't ready, for example a LinkedIn account that must reconnect. | See LinkedIn statuses and warnings. | To stop a campaign, click ⋯ → Archive. ⋯ → Restore brings it back, paused. Related articles: Create a campaign · Read your campaign's Activity tab

Last updated on Nov 16, 2026

Mark a meeting booked

Booked a call with a lead? Mark the meeting booked. Looply stops their remaining campaign steps, so they don't get another follow-up. Marking sends nothing to the person and adds nothing to your calendar. It only changes what Looply does next. What you need: a reply from the person, or their contact in Looply. Step 1: Find the button | Where | What to click | | --- | --- | | The new-reply card that pops up while Looply is open | Meeting booked, next to Open | | An open conversation in Inbox | Mark meeting booked | | A contact's page in Contacts | Mark meeting booked | | Home on a phone: tap a reply | Mark meeting booked | An Inbox conversation, with Mark meeting booked marked Step 2: Mark it Click the button. Looply shows "Meeting booked with" and the person's name, with Undo. A new-reply card closes. In the Inbox and on the contact's page, the button now reads Meeting booked, with a check. The confirmation, with Undo marked What happens next - Looply pauses every sequence still running for this person, in all your campaigns and brands. That includes leads with the same email address. - Their reply branches pause too. - If they later send an out-of-office reply, their sequence doesn't restart. - Their campaign counts them as interested. In its Leads tab, they show Meeting booked. A campaign's Leads tab, with Meeting booked marked Undo it Click Undo on the confirmation. Or click Meeting booked again: Looply shows "Meeting unmarked". Looply restarts exactly what it paused. A lead who replied in the meantime stays replied. → Learn more: When someone replies If something goes wrong | What you see | Why | What to do | | --- | --- | --- | | "Couldn’t mark the meeting. Try again." | Looply couldn't save it. | Try again. If it keeps failing, write to us from the chat. | | "Couldn’t undo. Try again." | Looply couldn't undo it. | Click Meeting booked to unmark it. | | No button on Home | On a computer, a reply on Home opens the conversation. | Mark it there, in Inbox. | Frequently asked questions Where can I see all my booked meetings? There's no list. Each campaign's Leads tab shows Meeting booked next to the person. Does Looply tell my CRM? No. Marking a meeting doesn't change the contact, so nothing is synced. Related articles: Inbox · Organize contacts with views and lists · Notifications and new-reply alerts

Last updated on Nov 16, 2026

Unsubscribes, bounces and who Looply won't email

Looply stops emailing people who ask to stop or whose address bounces. It puts their address on your Blocklist, so no campaign emails them again. When someone asks to stop They reply asking to stop. Looply labels the reply Unsubscribed. The campaign's rule is always Stop and never email them again: - their sequence stops; - no campaign of any of your brands emails that address again; - the person's other running leads with that address are paused. Looply missed it? Open the email reply in the Inbox, click its label, then pick Unsubscribed under Change label. A campaign's Settings, with the Unsubscribed row of When they reply marked They click unsubscribe in their email app. Each campaign email carries a standard one-click unsubscribe header. Email apps that support it can show an Unsubscribe button next to your name. After a click, the address is on your Blocklist and the person's running leads in all your campaigns are paused. Looply doesn't add an unsubscribe line to the text of your emails. Write one in your steps if you want one, for example: "Not for you? Reply stop and I won't write again." They decline. In the campaign's Settings tab, under When they reply, set Not interested to Stop and never email them again. The address is then blocked like an unsubscribe. → Learn more: When someone replies When an email bounces A hard bounce means the address doesn't exist or refuses your email. Looply reads the bounce notice that arrives in your inbox. It can take several hours. Then Looply: - stops the person's sequence: they show Failed in Leads, with "This email bounced: the address didn’t accept it."; - adds Email bounced to the campaign's Activity; - puts the address on your Blocklist, so your other campaigns skip it too. A temporary bounce, such as a full mailbox, changes nothing. The campaign's Bounced figure shows the share of its emails that bounced. A campaign's Activity, with an Email bounced line marked Who Looply won't email Everyone on your Blocklist, in every campaign of every brand: | On the list because | Shown as | | --- | --- | | They replied asking to stop | Replied asking to stop | | They replied not interested, under Stop and never email them again | Replied not interested | | They used the unsubscribe button or link | Used the unsubscribe link | | Their address bounced | Bounced | | You or a teammate added them | Added by hand | | Their company's domain is blocked | Domain | When a campaign step reaches a blocked address, Looply skips the email. Activity shows it as Skipped. In Leads, the person shows Blocked, or Unsubscribed when they asked to stop, with a line saying why Looply skipped them, such as "This address is on your blocklist, so Looply skipped it." The rest of their sequence stops. A reply branch that reaches a blocked address ends the same way. The Leads tab, with a Blocked lead marked A blocked person also never starts again: if they are added to a campaign later, or a campaign is resumed, their lead stays Blocked (or Unsubscribed). That includes the campaign's LinkedIn steps. People with no email address are skipped too. → Learn more: Find emails Good to know - Looply matches people by their email address. A contact with no email address can't be matched to the Blocklist, so a LinkedIn-only campaign can still reach them. - To see, add, remove or export blocked people and domains, go to Settings → Blocklist. → Learn more: Your Blocklist - Removing someone from the Blocklist doesn't restart the leads it stopped. Related articles: Your Blocklist · Read your campaign's Activity tab · Email warm-up and daily limits

Last updated on Nov 16, 2026

Your Blocklist: who Looply never emails

Your Blocklist holds every email address and domain Looply never emails. People who unsubscribe or bounce are added on their own. You can add more, remove someone, or download the list. Step 1: Open your Blocklist Go to Settings → Blocklist, under Workspace. Each row shows the email or domain, why it is there, and when it was added. When someone was added from a campaign, its name follows the reason, for example "Replied asking to stop · Q4 outreach". Settings, Blocklist, with the list of blocked emails marked Use the chips to narrow the list: All, Unsubscribed, Bounced, Added by hand and Domains. Each shows how many entries it holds. Search emails or domains finds one entry. Step 2: Add emails or domains Click Add. In Emails or domains, one per line or separated by commas, type or paste what you want to block: - an email address, such as [email protected]; - a domain, such as acme.com. A domain blocks every address at it, and at its subdomains (acme.com also blocks [email protected]). You can also click Upload CSV or TXT. Looply reads every cell that looks like an email address or a domain. If the file holds email addresses, its domains stay off. A lead list's website column would otherwise block whole companies. To block them too, switch on Also block the domains in this file. Click Add to blocklist. A message says how many were added, how many were already blocked, which ones weren't valid, and how many campaign leads stopped. The Add to blocklist window, with the field and the upload button marked Running leads with these addresses stop at once, in every campaign. Step 3: Remove an entry Click the bin at the end of the row, then Remove. When the person asked not to be emailed, the window says so: "They asked not to be emailed. Remove only if they asked to hear from you again." The Remove window for a blocked email Removing someone doesn't restart the leads the Blocklist stopped: they stay stopped. Step 4: Export the list Click Export CSV. The file lists every entry with its kind (email or domain), reason, source, campaign and the date it was added. FAQ Who can change the Blocklist? You and your team members. I can't add an email address. Set up your business first. Until then you can add domains only. How many can I add at once? As many as you like. Looply sends them 5,000 at a time. Does the Blocklist cover LinkedIn? It matches people by email address. A blocked person with an email on their contact never starts a campaign, LinkedIn steps included. A contact with no email address can't be matched. Related articles: Unsubscribes, bounces and who Looply won't email · When someone replies · Contacts, lists and views

Last updated on Nov 16, 2026